PHASE 3 - SYNTHESIS (PART 1)

COMPONENTS/ PARTS & THEIR TECHNICAL DATA



1. Cylinder (Jack)

    Material = Stainless steel Type 304
    Cylinder size = d, 25mm (DIAMETER)
  

2. Tank (Jack)

     Material = Stainless steel Type 304
     Thickness,t = 11mm
     Outer diameter, d = 47mm
     Inner diameter,d = 25mm


3. Tank (Pump)

    Material = Stainless steel Type 304
    Thickness,t = 9.3mm
    Inner diameter,d = 20mm
    Outer diameter = 38.6mm

4. Threaded Cylinder

    Inner diameter,d = 10mm (Threaded)
    Outer diameter ,d =20mm

5. Power Screw (Pump_Tank)

    Mean Diameter ,dm =0.01m
    Material = Hard steel on cast iron
    Thrust collar friction (Coefficient of friction,fc) =0.15
    Thickness of power screw, l =0.0015m

6. Hydraulic fluid

    Type:
    Lifespan:

7. Sprocket
   
    Driven Teeth ,N1 =28
    Diameter driven sprocket,d = 0.06m
    Driver Teeth ,N1 =14
    Diameter driver sprocket,d = 0.0315m

8. Chain

                                  

side view of chain

top view of chain

    

    Type: 428
    Roller diameter,R = 8.5mm
    Pin diameter = 4.44mm
    Average strength = 1850 Pa    
    Cylinder cc (Max) = 125 cc
    H1 = 10.2mm
    H2 = 11.9mm
    T1 = 1.5mm
    T2 = 1.5mm
    F = 8.55mm
    G = 9.7mm
    W = 7.94 mm
    P,Pitch diameter = 12.7mm



Hydraulic hose
Extension Rod
Tank holder
Spocket shaft
Bolts and nuts
Sprocket driver
Power screw (pump)
Motor
Thrust roller bearing
Thread cylinder (pump)
Remote control switch


WILL BE UPDATED !!